Bird Ladder Annual Open House May 14th, 2015

I would like to invite you to our annual open house May 14th, 2015.  We will again feature our pig roast for lunch.  All our equipment will have an additional 10% off that day.  We will have factory reps doing demos on their equipment.  We will be featuring a couple of new items.

The first is the redesigned shingle hoist from Tranzsporter.  It features a new platform, the 200lb model hoist features a 25% increase in lifting capacity, up to 250 lbs(TP250). The new collapsible carriage comes with cam followers for better tracking and handling. Carriage also features an aluminum deck and flap for lighter weight and longer life. A rolled goods/plywood bracket comes with unit and pins into carriage.  For heavier roofing materials, the 400 lb. platform hoist features a  lighter weight carriage and revised track system. The TP400 carriage has a 30% reduction in weight over previous models. The aluminum deck and flap provide longer life and lighter weight.  This carriage also features a re-engineered and simplified cam follower system with less wear parts than other hoists. Rolled goods/plywood brackets comes included and pins into carriage.  Tranzsporter has also developed a new roof guard rail system.  It’s the quickest and easiest guardrail system to install, tear down and no tools required. Galvanized for the same price or less than competitor’s painted steel guardrails.

We will also be demonstrating the Reechcraft powermast system.   The PowerMast is great for mid to high access needs, offering unmatched portability and simplicity for a wide variety of wall access needs, up to 200+ feet. The tools-free mast assembly is not only easy to put together and connect, it is so compact a 65 ft. twin system can fit in the back of your truck or van!  We will have a unit set up at the show.pm_main1  We will also be demonstrating the Powerlift.   The PowerLift is a triple threat: convenient, secure and easy to use. It provides additional security and safety, while still helping you gain access to difficult-to-reach indoor and outdoor spaces. One person can easily move and operate this equipment up stairs or inclines – it’s the lightest low-level lift on the market.ml20

Knaack reps. will also be demonstrating the new model 118-M Data Vault.  A step above the traditional jobsite protection device, KNAACK® DataVault™ mobile provides a highly mobile jobsite connectivity solution, empowering productivity and digital collaboration. KNAACK® DataVault™ arrives on the job ready for use, and is supported with a nationwide manufacture certified support network to bring agile solutions to customers.118-M_PI_outlined_front_doors_open

We will also have our free ladder safety and fall protection classes again this year.  The class times are as follows:

10:00 and 2:00- Ladder Safety      11:00 and 1:00  Fall protection

Please contact chuck@birdladder.com to reserve a spot.  The fall protection classes are limited to the first 20 registered.

 

 

Roof Guard Rail System

roof guard rail;When employees are required to do maintenance on the  heating and cooling equipment located on the roof they must be protected from falls. The solution must comply with OSHA (Standards-29CFR) 1910.23 and 1926.502.   The simplest way to do this is with a roof guard rail system that is easy to install, requiring no tools and does not damage the roof.  Roof Zone has developed a product, the RZ Guardrail System, that meets these requirements.  Made in the USA,  it’s the quickest and easiest guardrail system to install and remove, requiring no tools, no permanent installation, and galvanized to eliminate rust issues.

The guardrail base mount is hot-dipped galvanized with protective protective vinyl pads attached to protect roof.  The base holds two rails and comes with easy grip openings on each for one or two persons to carry.  Optional toe board brackets are available. The galvanized guard rail are available in 6 ft., 8 ft. and 10 ft. length.  For roof hatch or skylight applications, a swing gate guardrail is available.

For applications where it is required to maintain sight lines while offering fall protection an optional collapsible guardrail bracket is available so the guard rail system can be laid down on the roof to maintain architectural integrity.

Please visit our website for more info or call us at 800-776-3595 for more information.

Work Safe, Fast, Smart and Easy

ReechCraft PowerLiftEver get in those difficult to reach situations at work or in the yard? Do you get tired of lugging heavy and awkward stage scaffolding from job to job? The ReechCraft PowerLift system is the ideal solution for these common job-site headaches. It’s easy to setup and move, lightweight and convenient. Ensuring you get the most productivity possible out of your time on the job.

Work Safe
The ReechCraft PowerLift system is fully compliant with the ANSI safety guidelines. A fully enclosed basket with metal guardrails and a harness anchor point means you’ll be safe and sound high in the air. Feeling a sense of security and having a stable platform from which to work will increase productivity and decrease workplace accidents or injuries. If the power goes out, there is a secondary manual crank to lower the lift. Continue reading

Self Closing Safety Gate

image of self closing gate system
The best way to stop a fall is to eliminate the hazard. By using a self closing safety gate many falls can be prevented. Applications for a safety gate would be: ladderway openings, stairwell openings, equipment access ladders, scaffolding, mezzanines, and working platforms to name a few. Safety gates can be ordered painted safety yellow, hot-dipped galvanized, stainless steel, or aluminum. They are shipped fully assembled, meet OSHA standards, self closing, and are easy to install. They feature dual stainless steel springs, adjustable lengths, and reversible swing direction by simply inverting gate. Such a simple solution to eliminate a fall.

Bird Ladder Open House May 15th

Bird Ladder will be having their annual open house May 15th. Every year we have customer appreciation day which includes a truck load sale on everything. Werner ladders, pump jacks, planks, Granite scaffolding, MBW compactors, trowels and mixers, Werner fall protection, Acro roofing equipment, Tie down shingle hoists, Van Mark brakes, Knaack job boxes, Weatherguard truck and van equipment, Reechcraft PowerPole, PowerLift and PowerMast to name a few.

We will also have factory reps demonstrating their products. We will be introducing new products at the show.  The NEW Knaack 118 data vault will be on display with demonstrations. We will also have the new Reechcraft Powermast set up. They also have a new free standing base that will be shown. We will also have new MBW plate compactors on display.

Free safety classes will also be returning this year. We will offer ladder safety courses, fall protection courses and also a presentation by Acro products on use of their roof edge protection. Cards will be issued for the ladder and fall protection training. We are also attempting to have a representative from OSHA here to answer questions.

We also serve lunch from 12:00 till the food runs out. So bring your shopping list, save money, get trained, and have lunch.

OSHA Seeks Partners for June 2-6 National Stand-Down on Construction Falls

construction site

OSHA will conduct a national safety stand-down June 2-6 to raise awareness among construction employers and their workers about the hazards of falls, the leading cause of fatal incidents for the industry.

OSHA is seeking partners for the stand-down, and it has stocked a national safety stand-down website with information about how to conduct a successful stand-down. After it takes place, employers will be able to provide feedback and receive a personalized certificate of participation.

An OH&S webinar on April 3 is another way to get information about preventing construction falls. Three experts from OSHA (Jim Maddux, Directorate of Construction director); NIOSH (Dr. Christine Branche, Office of Construction Safety and Health director); and CPWR—The Center for Construction Research and Training (Pete Stafford, executive director) will discuss OSHA’s ongoing Fall Prevention Campaign and the latest information about the causes of falls in the U.S. construction industry.

“Falls account for more than a third of all deaths in this industry,” said Dr. David Michaels, the OSHA assistant secretary. “We’re working with employers, workers, industry groups, state OSH plans, and civic and faith-based organizations to host safety stand-downs that focus on recognizing hazards and preventing falls. We are getting the message out to America’s employers that safety pays and falls cost.”

 

The stand-down is part of OSHA’s ongoing Fall Prevention Campaign, which was started in 2012 and was developed in partnership with the National Institute for Occupational Safety and Health and NIOSH’s National Occupational Research Agenda program.

“We are pleased to join again with OSHA and our NORA partners to focus on fall prevention at construction sites,” said NIOSH Director Dr. John Howard. “Preventing falls in the construction industry benefits everyone, from the worker, to the employer, to the community at large. This safety stand-down serves as an important opportunity for everyone to take the time to learn how to recognize and prevent fall hazards.”

Bus Maintenance Scaffold

Many of the new commercial bus designs require maintenance access to roof panels. Keeping employees safe while doing this is a safety issue.  Granite Industries and Bird Ladder Co.  have developed a bus maintenance scaffold systems to keep maintenance employees safe and meet OSHA requirements.  It is a mobile system that is manufactured to the specifications of the bus being used.  We have sold units to City of Milwaukee Transit, Marta and City of Omaha Metro.  Each operation had different requirements.  All units have stairs, guard rails, and toe boards.  Employees have safe access to work being done on top of bus.  Please contact us for more information. milw side shot DSC_0205

Safety Pays, but Falls Cost

Here is a copy of an article I found written by Jim Maddux, director of OSHA Directorate of Construction.  Take a few minutes to read it.

Safety Pays, but Falls Cost

OSHA’s Fall Prevention Campaign promotes ‘Planning,’ ‘Providing’ and ‘training’ to reduce the number one cause of death in construction

By Jim Maddux, director, OSHA Directorate of Construction

Falls account for one third of all work-related deaths in the construction industry. In 2010, there were 264 fall fatalities (255 falls to lower level) out of 774 total fatalities in construction. Of those deaths from falls, 90 were from roofs, 68 from ladders and 37 from scaffolds.

Many of the workers who are killed and injured on the job are temporary workers who perform the most dangerous jobs and often have limited English proficiency, and who don’t always get the training and equipment they need to do their jobs safely. As Assistant Secretary of Labor for Occupational Safety and Health Dr. David Michaels has said, “All workers have the right to go home safe and sound at the end of the day, whether they’ve been on the job one day or 25 years.” Continue reading

OSHA Scaffold Citation

Here is an article I found that may be on interest to you.  Be sure when your employees are working on scaffold that they have had training on the proper use of scaffold.  ! fine like this could be devastating to the profit from the job.

Trade News Release Banner Image

Region 2 News Release: 13-1858-NEW/BOS-13-162
Sept. 24, 2013
Contact: Ted Fitzgerald      Andre J. Bowser
Phone: 617-565-2075      617-565-2074
Email: fitzgerald.edmund@dol.gov      bowser.andre.j@dol.gov

US Labor Department’s OSHA proposes more than $272,000 in fines, cites
four contractors for safety hazards at midtown Manhattan site

NEW YORK – The U.S. Department of Labor’s Occupational Safety and Health Administration has proposed $272,720 in fines against four New York contractors for safety hazards identified during the construction of a midtown Manhattan hotel. The March 21 inspection was conducted in response to a complaint about fall hazards at the 325 W. 33rd St. work site.

The largest penalties of $249,920 are proposed for Flintlock Construction Services LLC, the Mamaroneck-based general contractor for the construction of the 23-story hotel. Flintlock was cited for seven violations of OSHA’s fall protection and scaffolding standards that involved workers exposed to potentially fatal falls of up to 26 feet while they were on scaffolding.

“These employees were one trip, slip or misstep away from a deadly or disabling fall. Falls are the leading cause of death among workers in construction,” said Kay Gee, OSHA’s area director for Manhattan, Brooklyn and Queens. “There is no excuse for an employer’s failure to supply and ensure the use of legally required safeguards that can prevent injuries and save lives. The sizable fines proposed reflect both the severity of these hazards and that Flintlock was aware of, and failed to correct, the hazards.”

Specifically, Flintlock failed to provide and ensure the use of fall protection, such as guardrails or personal fall- arrest systems, for workers on the scaffold; the scaffold lacked a safe means of access, causing workers to climb its cross-bracing to reach their work platforms; the work platforms were not fully planked; and the scaffold was not tied off to restrain it from tipping. These conditions resulted in the issuance of four willful citations, with $233,200 in fines to Flintlock.

OSHA also issued three serious citations, with $16,720 in fines, to Flintlock for additional hazards. These include failing to provide training on the hazards associated with erecting scaffolds; failing to have a competent person determine the feasibility of providing fall protection for workers erecting and dismantling the scaffolding; a scaffold walkway that was too narrow; and inadequate anchorage for the fall protection system.

V&P Altitude Corp., a Brooklyn-based siding contractor, was issued five serious citations, with $13,200 in fines, for lack of fall protection; no safe access to the scaffolding; not fully planking the scaffold platforms; failing to tie off the scaffolding; and not locking mobile scaffold wheels and casters.

SMK Associates, an Astoria-based masonry contractor, was issued three serious citations, with $7,600 in fines, for electrical hazards and failing to provide eye and face protection. Maspeth Steel Fabricators Inc., a Maspeth-based steel framing contractor, was issued one serious citation, with a $2,000 fine, for failing to provide training on the hazards of working on scaffolds.

The citations can be viewed at http://www.osha.gov/ooc/citations/FlintlockCitations.pdf*,http://www.osha.gov/ooc/citations/SMKCitations.pdf*, http://www.osha.gov/ooc/citations/VPCitations.pdf* andhttp://www.osha.gov/ooc/citations/MaspethCitations.pdf*.

A willful violation is one committed with intentional, knowing, or voluntary disregard for the law’s requirements, or with plain indifference to worker safety and health. A serious violation occurs when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.

Due to the nature and severity of violations committed by Flintlock Construction Services LLC, the general contractor has been placed in OSHA’s Severe Violator Enforcement Program, which mandates targeted follow-up inspections to ensure compliance with the law. OSHA’s SVEP focuses on recalcitrant employers that endanger workers by committing willful, repeat or failure-to-abate violations. Under the program, OSHA may inspect any of the employer’s facilities if it has reasonable grounds to believe there are similar violations.

Each employer has 15 business days from receipt of its citations and proposed penalties to comply, meet with OSHA’s area director, or contest the findings before the independent Occupational Safety and Health Review Commission.

OSHA has created a Stop Falls Web page at http://www.osha.gov/stopfalls, which has detailed information in English and Spanish on fall protection hazards and safeguards. The page offers fact sheets, posters and videos that vividly illustrate various fall hazards and appropriate preventive measures.

To ask questions, obtain compliance assistance, file a complaint or report workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA’s toll-free hotline at 800-321-OSHA (6742) or the agency’s Manhattan Area Office at 212-620-3200.

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA’s role is to ensure these conditions for America’s working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov.

Construction Rises to the Top Spot in Labor Statistics’ Deadliest Industries List

number and rate of occupational injuries, by industry sectorFatal work injuries in the private construction sector increased 5 percent to 775 in 2012, while total hours worked in the industry increased just one percent.

The 2012 increase in fatal occupational injuries follows five consecutive years of declining fatalities in construction. Fatal construction injuries are down 37 percent since 2006.

The reversal in construction’s worker-fatality trend is stark in light of the fact that the 2012 fatal-work-injury count for all U.S. employers is down 6.6 percent to the second-lowest total since the U.S. Bureau of Labor Statistics first started conducting the Census of Fatal Occupational Injuries in 1992

The rate of fatal work injury for all U.S. workers in 2012 was 3.2 per 100,000 full-time equivalent workers, down from a rate of 3.5 per 100,000 in 2011. There were 9.5 U.S. construction-worker deaths in 2012 per 100,000 full-time workers.