OSHA Seeks Partners for June 2-6 National Stand-Down on Construction Falls

construction site

OSHA will conduct a national safety stand-down June 2-6 to raise awareness among construction employers and their workers about the hazards of falls, the leading cause of fatal incidents for the industry.

OSHA is seeking partners for the stand-down, and it has stocked a national safety stand-down website with information about how to conduct a successful stand-down. After it takes place, employers will be able to provide feedback and receive a personalized certificate of participation.

An OH&S webinar on April 3 is another way to get information about preventing construction falls. Three experts from OSHA (Jim Maddux, Directorate of Construction director); NIOSH (Dr. Christine Branche, Office of Construction Safety and Health director); and CPWR—The Center for Construction Research and Training (Pete Stafford, executive director) will discuss OSHA’s ongoing Fall Prevention Campaign and the latest information about the causes of falls in the U.S. construction industry.

“Falls account for more than a third of all deaths in this industry,” said Dr. David Michaels, the OSHA assistant secretary. “We’re working with employers, workers, industry groups, state OSH plans, and civic and faith-based organizations to host safety stand-downs that focus on recognizing hazards and preventing falls. We are getting the message out to America’s employers that safety pays and falls cost.”

 

The stand-down is part of OSHA’s ongoing Fall Prevention Campaign, which was started in 2012 and was developed in partnership with the National Institute for Occupational Safety and Health and NIOSH’s National Occupational Research Agenda program.

“We are pleased to join again with OSHA and our NORA partners to focus on fall prevention at construction sites,” said NIOSH Director Dr. John Howard. “Preventing falls in the construction industry benefits everyone, from the worker, to the employer, to the community at large. This safety stand-down serves as an important opportunity for everyone to take the time to learn how to recognize and prevent fall hazards.”

Weatherguard Van Solutions

WernerCo Introduces New Weather Guard OEM Van Solutions

van interior

van interior

Range includes Ford Transit Connect, Ram ProMaster, Mercedes Sprinter and others.

WernerCo announces the introduction of professional trade packages for commercial van OEM’s (Original Equipment Manufacturer), including the Ram ProMaster, the Mercedes Sprinter, Ford Transit Connect and others.

Designed for contractors and remodelers on the move, the Weather Guard OEM van solutions packages provide secure, durable and organized van solutions for professionals, regardless of the vehicle. The custom designed Weather Guard Van solutions are developed to fit every detail, including the contours of specialty vans, such as the Ram ProMaster. Continue reading

Podium Ladder promoted by Coach Tom Izzo


 

WernerCo podium ladder

WernerCo podium ladder

Podium ladder from Werner.

Coach Tom Izzo who has cut down many nets at NCAA finals is helping Werner promote their new fiberglass Podium ladder.   Ideal for working at fixed heights and easier to maneuver than scaffolds or lifts. Another advantage this fiberglass podium ladder offers in non conductivity.  Fiberglass does not conduct electricity, so it is much safer to use around electrical sources than highly-conductive aluminum.  The extra-large podium platform with toe guard feels like you are standing on the ground and 4X Work Zone allows you to work facing any direction. This podium  ladder features full aluminum bracing and a full set of rear horizontals. The extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360™ gives the bottom of the ladder protection from every angle with integrated rail shield, EDGE bracing and over-sized foot pads.

Using a platform type ladder reduces fatigue, increases productivity, and is safer than a standard step ladder.

Bus Maintenance Scaffold

Many of the new commercial bus designs require maintenance access to roof panels. Keeping employees safe while doing this is a safety issue.  Granite Industries and Bird Ladder Co.  have developed a bus maintenance scaffold systems to keep maintenance employees safe and meet OSHA requirements.  It is a mobile system that is manufactured to the specifications of the bus being used.  We have sold units to City of Milwaukee Transit, Marta and City of Omaha Metro.  Each operation had different requirements.  All units have stairs, guard rails, and toe boards.  Employees have safe access to work being done on top of bus.  Please contact us for more information. milw side shot DSC_0205

American made compaction plates

MBW is one of the last remaining American made manufacturer of compaction plates.  To remain competitive, they have upgraded there manufacturing equipment to help them remain competitive in a market where other manufacturers have gone off shore to manufacture their equipment.  Here is a link to a list of the equipment they are presently using in the manufacture of their equipment.

Since 1967, MBW has been manufacturing one of the construction industry’s most interesting lines of compaction, concrete and related equipment.

What makes the MBW line interesting? MBW is not a copyist – we do not simply duplicate designs developed by others. MBW begins each new engineering project with the assumption that significant progress can be made in terms of improved productivity, reduced maintenance, longer life, enhanced user safety or lower long-term cost of ownership. Often, MBW’s R&D efforts result in entirely fresh approaches to solving industry problems. Many of our products have pushed the productivity envelope to new heights. Some MBW products afford their operators the industry’s safest tools in a given product class. Most MBW products solve long standing maintenance issues and extend product life expectations. Our goal is to provide equipment users with products of significant, tangible, comparative value… reasons to invest in MBW products.

Recently they have introduced a new line of compact plates called the GPX series.

This series of economical vibratory plates, the GP12, GP15 & GP18, are portable, and offer outstanding compaction performance. A patent-pending suspension system that places shock mounts in a predominantly shear mode at the high amplitude front end of the plate and a predominantly compressive mode at the low amplitude trailing end of the plate. This system reduces hand arm vibration and also better isolates all upper mass components, including the engine, from vibrations produced by the machine’s exciter. With amplitudes up to .058 inches, centrifugal force up to 2100 lbf and travel speed to 75 feet per minute these plates are ideal in confined areas of granular soils including sands, bank run, gravels and capable of achieving lift depths of up to 10 inches (25 cm).

These lightweight plates weighing 129 lbs (59 kg) to 143 lbs (65 kg) are easy to lift and maneuver about the jobsite. Accompanied by intense vibration this series of plates are ideally suited as an economical alternative for small to medium soil compaction applications.

WernerCo. Podium Ladder – A New Design for Platform Ladders

WernerCo Podium Lladder

WernerCo Podium Ladder

WernerCo. has introduced a new platform ladder called the Podium which is ideal for working at fixed heights and is designed to provide a full range of motion while providing protection at every angle.

The Podium ladder uses the LOCKTOP™ design which organizes tools at the top of the ladder which also functions as an integrated waist-high guard rail that securely wraps around the work zone.  The ladder also features the EDGE360™ bracing system that gives protection from every angle on the over-sized platform which allows four times the work zone then a standard ladder.

Mark Peters, Director of Marketing at WernerCo. stated that  “We designed our new Podium Ladder to help prevent misuse and falls. While safety is the most important feature, we also know that comfort, mobility and access are important to our customers who have to stand on a ladder for extended periods of time. The new Podium Ladder includes an actual standing platform vs. a traditional ladder step that allows for increased reach and range of motion. The best part, it feels like the user is standing on the ground instead of on a ladder.”

The Podium ladder is also equipped with a full set of rear horizontals, full aluminum bracing and is manufactured with seven-layer fiberglass construction.  The Podium has a 300lb load capacity which includes user and materials and has a Type 1A duty rating.

Scaffold Wind Clips

image of Scaffold Wind ClipsWith winter season approaching us in the north, it is sometimes required that the job site needs to be enclosed and to maintain a heated work area. What many contractors will do is erect scaffolding around the job site and and wrap the structure with reinforced plastic tarps to maintain heat in the work area. To attach the tarps to the scaffold, wind clips are used. When attaching tarps to scaffold special care must be taken to insure that windy conditions with not affect the scaffold. Extra wall ties and counter weights are need to counter act the effects of wrapping the scaffold with plastic. Care must also be taken with the type of heater being used so an open flame does not come into contact with the tarp.

New Knaack 4830-D Jobsite Chest

4830-d Box

4830-D Box

Knaack has developed the first and only jobsite Knaack 4830-D with independent locking drawer.  It has many features which include:

  • * Anti-Slam Lid- Gas strut supported lid to control closing speed
  • * Raised Chest Floor- Easily reach chest bottom without over-reaching
  • * 3 Sided easy grip lid-Continuous ergonomic grip for easy access
  • * Independent Watchman IV locks- Separate locking system for chest and drawer.

Junk Trunk quick access drawer- Quickly access high demand tools.

  • Weight: 254 lbs.
  • 48″ x 30″ x 35″ closed

Knaack has hit a home run with this box.  The draw capacity is rated at 150 lbs.

Safety Pays, but Falls Cost

Here is a copy of an article I found written by Jim Maddux, director of OSHA Directorate of Construction.  Take a few minutes to read it.

Safety Pays, but Falls Cost

OSHA’s Fall Prevention Campaign promotes ‘Planning,’ ‘Providing’ and ‘training’ to reduce the number one cause of death in construction

By Jim Maddux, director, OSHA Directorate of Construction

Falls account for one third of all work-related deaths in the construction industry. In 2010, there were 264 fall fatalities (255 falls to lower level) out of 774 total fatalities in construction. Of those deaths from falls, 90 were from roofs, 68 from ladders and 37 from scaffolds.

Many of the workers who are killed and injured on the job are temporary workers who perform the most dangerous jobs and often have limited English proficiency, and who don’t always get the training and equipment they need to do their jobs safely. As Assistant Secretary of Labor for Occupational Safety and Health Dr. David Michaels has said, “All workers have the right to go home safe and sound at the end of the day, whether they’ve been on the job one day or 25 years.” Continue reading

OSHA Scaffold Citation

Here is an article I found that may be on interest to you.  Be sure when your employees are working on scaffold that they have had training on the proper use of scaffold.  ! fine like this could be devastating to the profit from the job.

Trade News Release Banner Image

Region 2 News Release: 13-1858-NEW/BOS-13-162
Sept. 24, 2013
Contact: Ted Fitzgerald      Andre J. Bowser
Phone: 617-565-2075      617-565-2074
Email: fitzgerald.edmund@dol.gov      bowser.andre.j@dol.gov

US Labor Department’s OSHA proposes more than $272,000 in fines, cites
four contractors for safety hazards at midtown Manhattan site

NEW YORK – The U.S. Department of Labor’s Occupational Safety and Health Administration has proposed $272,720 in fines against four New York contractors for safety hazards identified during the construction of a midtown Manhattan hotel. The March 21 inspection was conducted in response to a complaint about fall hazards at the 325 W. 33rd St. work site.

The largest penalties of $249,920 are proposed for Flintlock Construction Services LLC, the Mamaroneck-based general contractor for the construction of the 23-story hotel. Flintlock was cited for seven violations of OSHA’s fall protection and scaffolding standards that involved workers exposed to potentially fatal falls of up to 26 feet while they were on scaffolding.

“These employees were one trip, slip or misstep away from a deadly or disabling fall. Falls are the leading cause of death among workers in construction,” said Kay Gee, OSHA’s area director for Manhattan, Brooklyn and Queens. “There is no excuse for an employer’s failure to supply and ensure the use of legally required safeguards that can prevent injuries and save lives. The sizable fines proposed reflect both the severity of these hazards and that Flintlock was aware of, and failed to correct, the hazards.”

Specifically, Flintlock failed to provide and ensure the use of fall protection, such as guardrails or personal fall- arrest systems, for workers on the scaffold; the scaffold lacked a safe means of access, causing workers to climb its cross-bracing to reach their work platforms; the work platforms were not fully planked; and the scaffold was not tied off to restrain it from tipping. These conditions resulted in the issuance of four willful citations, with $233,200 in fines to Flintlock.

OSHA also issued three serious citations, with $16,720 in fines, to Flintlock for additional hazards. These include failing to provide training on the hazards associated with erecting scaffolds; failing to have a competent person determine the feasibility of providing fall protection for workers erecting and dismantling the scaffolding; a scaffold walkway that was too narrow; and inadequate anchorage for the fall protection system.

V&P Altitude Corp., a Brooklyn-based siding contractor, was issued five serious citations, with $13,200 in fines, for lack of fall protection; no safe access to the scaffolding; not fully planking the scaffold platforms; failing to tie off the scaffolding; and not locking mobile scaffold wheels and casters.

SMK Associates, an Astoria-based masonry contractor, was issued three serious citations, with $7,600 in fines, for electrical hazards and failing to provide eye and face protection. Maspeth Steel Fabricators Inc., a Maspeth-based steel framing contractor, was issued one serious citation, with a $2,000 fine, for failing to provide training on the hazards of working on scaffolds.

The citations can be viewed at http://www.osha.gov/ooc/citations/FlintlockCitations.pdf*,http://www.osha.gov/ooc/citations/SMKCitations.pdf*, http://www.osha.gov/ooc/citations/VPCitations.pdf* andhttp://www.osha.gov/ooc/citations/MaspethCitations.pdf*.

A willful violation is one committed with intentional, knowing, or voluntary disregard for the law’s requirements, or with plain indifference to worker safety and health. A serious violation occurs when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.

Due to the nature and severity of violations committed by Flintlock Construction Services LLC, the general contractor has been placed in OSHA’s Severe Violator Enforcement Program, which mandates targeted follow-up inspections to ensure compliance with the law. OSHA’s SVEP focuses on recalcitrant employers that endanger workers by committing willful, repeat or failure-to-abate violations. Under the program, OSHA may inspect any of the employer’s facilities if it has reasonable grounds to believe there are similar violations.

Each employer has 15 business days from receipt of its citations and proposed penalties to comply, meet with OSHA’s area director, or contest the findings before the independent Occupational Safety and Health Review Commission.

OSHA has created a Stop Falls Web page at http://www.osha.gov/stopfalls, which has detailed information in English and Spanish on fall protection hazards and safeguards. The page offers fact sheets, posters and videos that vividly illustrate various fall hazards and appropriate preventive measures.

To ask questions, obtain compliance assistance, file a complaint or report workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA’s toll-free hotline at 800-321-OSHA (6742) or the agency’s Manhattan Area Office at 212-620-3200.

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA’s role is to ensure these conditions for America’s working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov.