Van Mark IT8

Van Mark IT8

Mark IV Series Bending Capacities Recommended:

•Trim Coil, Aluminum: Rec. .04 in. - Max .063 in.
•Gutter Coil: Rec. .032 in. - Max .032 in.
•Galvanized, Grade D: Rec. 24 ga. - Max 20 ga.
•Galvanized, Grade E: Rec. 24 ga. - Max 24 ga.
•Copper, 1/4 Hand: Rec. 32 oz. - Max 36 oz.
__________________________________________________

•Heavy-duty extruded aluminum shop stand included with every Mark IV.
•The Extreme Shop Stand will not rock, rattle, roll or rust.
•Unit is fully detachable and collapsible for easy fast setup and transport.
•Hollow-core fixed hinge, bending hinge and base rail design makes this one tough brake.
•New FTA system (Fine-Tune Adjustment), means you still have control over adjusting your machine, though you may never need to.
•Mark IV Industrial TrimMaster Siding Brake has the strongest bending capacities you can get in a portable brake.
•Unique Cam-Locking system locks to the thickness of the material.
•Full loop locking and bending
handles are ergonomic and provide for single operator use.
•Heavy-duty hinge provides years of dependable service without material curling at the ends or sags in the center.
•Mark IV Industrial Siding Brake now works with Trim Cutter, Quick Score, & Trim Former.
__________________________________________________

••FREIGHT TERMS FOR FREE COMMERCIAL SHIPPING ON ALL VAN MARK SIDING BRAKES:••

•1. Free Shipping applies to a Commercial Delivery Address w/ Semi Truck Access (Loading Dock or Fork Lift Access).
•2. This also includes Customer Pick-Up at the Common Carriers Trucking Terminal.
•3. For Residential Delivery Address there will be a extra charge based on location.
•4. A daytime telephone number must be supplied for all orders shipping Common Carrier.

Series: Industrial Trim Master

Length: 8' - 6"

Throat Depth: 14"

Number Of Cam-Locks: 9

Price: $4,275.00


types of Siding Bending Brakes TAPCO / Van-Mark

 

Can't find it? Have a unique job? Give us a call